View C9047_4444893.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IMAGE SENSOR
CCD multichannel detector head
C9047 series
Designed for back-thinned CCD area image sensors
C9047 series is an industrial camera with a high-speed, high resolution CCD (S9037-0902, S9037-1002) and usable in a wide range of applications including production line inspection and surveying. The CCD used in C9047 series is sensitive in the ultraviolet region (down to 130 nm *1) making C9047 series ideal for UV laser applications. As soon as power is turned on, C9047 series enters standby mode ready to output image data in synchronization with an external trigger signal. All camera settings can be made through serial communication ports (RS-232C). The CCD mounted in the camera is a back-thinned FFT-CCD (Full Frame Transfer CCD) that receives light from the backside and therefore has very high UV sensitivity. The camera body is compact yet designed to radiate heat efficiently away from the internal circuit and sensor. The CCD focal plane is flush with the front panel of the camera body making optical design easier.
Features
Applications
S9037-0902: 16 kHz S9037-1002: 9 kHz l External trigger operation l Easy handling PC controllable (RS232C) l Compact and lightweight
l Digital output l Real-time digital sensitivity correction l High UV sensitivity: sensitive down to 130 nm l Fast line rate
l Spectrophotometry l High-speed UV imaging l Bio-photon observation l Semiconductor inspection
The table below shows CCD image sensors applicable for C9047 series. Since C9047 series does not include CCD image sensors, so select the desired sensor and order it separately. Active area Type No. Number of total pixels Number of active pixels [mm (H) x mm (V)] S9037-0902 520 x 6 512 x 4 12.288 x 0.096 S9037-1002 1044 x 8 1024 x 4 24.576 x 0.096 *1: When the CCD sensor faceplate is removed.
1
CCD multichannel detector head
s Specifications
Parameter CCD structure Number of total pixels Effective number of pixels Pixel size Effective active area Scanning rate Maximum line rate S9037-0902 S9037-1002 RS-422 S9037-0902 S9037-1002 S9037-0902 S9037-1002 S9037-0902 S9037-1002 C9047
C9047 series
C9047-01
AD conversion resolution Camera interface Spectral response range Full well capacity Conversion gain Dark current Readout noise Digital circuit Supply voltage Analog circuit Analog circuit Storage temperature Operating temperature Operating humidity Dimension Weight
Back-thinned FFT-CCD 520 (H) x 6 (V) 1044 (H) x 8 (V) 512 (H) x 4 (V) 1024 (H) x 4 (V) 24 (H) x 24 (V) m 12.288 (H) x 0.096 (V) mm 24.576 (H) x 0.096 (V) mm 10 MHz 16 kHz 9 kHz 12-bit LVDS 200 to 1100 nm 600,000 e145 e /ADU (600,000 e- at 4095 ADC counts) 4,000 e-/pixel/s at +25 C 435 e- (3.0 ADU) at 10 MHz D. +5 V 0.25 V (600 mA Max.) A. +15 V 0.5 V (300 mA Max.) A. -15 V 0.5 V (300 mA Max.) -20 C to +70 C 0 C to +50 C 70 % Max. (no condensation) 90 (H) x 100 (W) x 120 (D) mm Approx. 800 g
s Dimensional outline (unit: mm)
1.9 50.0 (4 x) M3 DEPTH 4 0.5 (FOCAL PLANE)
POWER
50.0
90.0
RS232C
DIGITAL I/O
100.0
120.0
KACCA0123EA
2
CCD multichannel detector head
C9047 series
s Pin connection of "DIGITAL I/O" connector (3M 10236-5202JL, 36-pin female connector)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Signal name /RESET+ /CNT+ LEN+ NC DATA-TRIG+ GND D00+ D01+ D02+ D03+ D04+ D05+ D06+ D07+ D08+ D09+ D10+ D11+ Pin No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Signal name /RESET/CNTLENNC DATA-TRIGGND D00D01D02D03D04D05D06D07D08D09D10D11-
s Pin connection of "RS-232C" connector (OMRON XM2C-0912-111, 9-pin D-sub male connector)
Pin No. 1 2 3 4 5 Signal name NC RX TX NC GND Pin No. 6 7 8 9 Signal name NC RTS CTS NC -
s Pin connection of "POWER" connector (HIROSE RM12BRD-5S, 5-pin female connector)
Pin No. 1 2 3 4 5 Signal name D. +5 V D. GND A.+15 V A. GND A. -15 V
3
CCD multichannel detector head
s Connection example Refer to the drawing below to set up the hardware used in conjunction with this camera.
POWER CABLE (1.5 m) * A9618: 5 PIN (FOR C9047 SERIES)-12 PIN (FOR POWER SUPPLY) A9618-01: 5 PIN (FOR C9047 SERIES)-5 SEPARATED (FOR POWER SUPPLY) POWER SUPPLY (+5 V, 15 V)
C9047 series
CABLE FOR IMAGE SENSOR (2 m) * A9390-01 POWER + DIGITAL I/O INTERFACE BOARD * C8940 (RS-422), C8940-01 (LVDS) EXTENDED PANEL A9414 * (FOR 32-BIT INTERFACE)
RS232C CCD AREA IMAGE SENSOR S9037 SERIES + MULTICHANNEL DETECTOR HEAD C9047 SERIES
* Option
PC (Windows 2000/XP)
KACCC0210EC
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KACC1086E02
4
Jan. 2007 DN

▲Up To Search▲

Price & Availability of C9047

	To Download C9047 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .